BONE 3D Production

Fused filament fabrication · Bambu Lab

FFF: from prototypes to engineering parts

Two material ranges on our Bambu Lab printers with heated chambers, helping you find the right balance between application, lead time and budget.

CONTROLLED HEATED CHAMBER
FFF with a heated chamberMolten filament is deposited in successive layers, in a chamber heated according to the material. Principle diagram.

Two FFF options

The right material for your needs

01 · Standard materials

Straightforward prototyping

Check a shape, an assembly or ergonomics, make a bracket or produce small batches on a controlled budget.

PLAPETG

A starting point for models and parts with moderate performance requirements.

02 · Engineering materials

Meet a specific requirement

Develop tooling or a functional part with the required temperature resistance, stiffness, environmental exposure or flexibility in mind.

ABSASAPAHT-CFPCTPU

The choice is confirmed according to the application, geometry and manufacturing setup.

Heated chamber

Our Bambu Lab H2S, X1E and H2D Pro printers have heated chambers. Heating is adjusted to the material and the requirements of the part.

Direction-dependent strength

Material, infill and build orientation determine the final performance.

Online preliminary estimate

Select your file and configure your part. Our workshop confirms manufacturability before production.

Another filament-based option

Need Stratasys materials?

Both our Bambu and F370 services use heated chambers. The Stratasys service stands out through the manufacturer’s qualification of the machine, materials and process parameters as a complete system. This higher-cost option receives a separate workshop quote.

Explore industrial FDM on the F370

BONE 3D Production

Turn your file into a clear next step.

Upload your model for an initial estimate or a manufacturability review by our Paris workshop.

Request a quote